Tuesday, February 28, 2012

Cluster Pre-used Injection Moulding Machines

We are looking for a cluster of pre-used injection moulding machines for our operations in India. The pre-requisites for such machines are:
- The machines preferably should be of single make or maxiimum two.

For more details on Cluster Pre-used Injection Moulding Machines click here

180 Ton Haitian Injection Moulding Machine

Model: SA1600/600
- Shot size: 12.66 oz
- Controller: KEBA 1075
- Voltage: 460
- Clamp stroke: 16.93"
- Platen size: 27.6" x 27.6"
- Tiebar spacing: 18.5" x 18.5"

For more details on 180 Ton Haitian Injection Moulding Machine click here

175 Ton Nissei Injection Moulding Machine

Model: FS160S36ASE
- Shot size: 14.8 oz
- Controller: NC9000G
- Voltage: 480
- Screw size: 56mm
- Injection pressure: 19.410 psi
- Injection rate: 19.77 in3/sec
- Clamp stroke: 18.5"

For more details on 175 Ton Nissei Injection Moulding Machine click here

169 Ton Zhafir Injection Moulding Machine

- Model: Zahfir VE1500/580
- Shot size: 10.23 oz
- Controller: Sigmatek PLC
- Voltage: 460
- Clamp stroke: 16.54"
- Min/Max mold height: 7.09"/20.47"
- Max daylight: 37.01"

For more details on 169 Ton Zhafir Injection Moulding Machine click here

Nigata 150 Ton Injection Molding Machine

Model: NN150 - toggle clamp
- Shot size: 5.36 oz
- Tie bar spacing: 18.1" x 18.1"
- Platen size: 26.3" x 26.3"
- Daylight: 31.89"
Equipped with:
- Robot interface
- 480 volt
- Motor run hours

For more details on Niigata 150 Ton Injection Molding Machine click here

Toshiba 120 ton Injection Molding Machine

Model: ISG120S10-8A
- Shot size: 8.1O Z
- Tie bar spacing: 16.1 X 16.1
- Platen size: 14 X 24
- Daylight: 27.6 / 7.5
- Clamp stroke: 20
- Hydraulic K.O: Yes
- Voltage: 460 volte


For more details on Toshiba 120 ton Injection Molding Machine click here

110 to 165 ton Injection Molding Machine

We are looking for 110 to 165 ton injection molding machine with the following specification:
- Minimum shot size: 5 ounces
- We would like to keep the machine at 1996 or newer, with under 40,000 hoours total run time
- Preferred brands: Engel, Cincinnati and Van Dorn or Demag
- Minimum of 15.

For more details on 110 to 165 ton Injection Molding Machine click here

300 Ton Engel Toggle Clamp Injection Molding Machine

Model: ES1300/300
- S/N: 3822-300-90
- With Geiger Model EA MINI 2001/800SL Rectilinear motion robot
- S/N: 9239-9811-0417,
- Control: CC 88
- Shot weight: 23,34 Oz.
- Screw diameter: 55 mm,

- Tie Baar daimeter: 3,94"
- Distance between Tie Bars: 25.

For more details on 300 Ton Engel Toggle Clamp Injection Molding Machine click here

300 Ton Husky Injection Molding Machine

Model: G300RS60/50
- Clamping force: 300 Ton
- Shot Size: 19 oz,
- Platen Size: 40.5" x 40.5" (1029 x 1029 mm)
- Tie Bars: 28.3" x 28.3" (719x719 mm)
- Min Mold Height: 8" (203 mm)
- Daylight:: 30.

For more details on 300 Ton Husky Injection Molding Machine click here

110 Ton Sunil Hydraulic Injection Moulding Machine

- Tie bar spacing: 400 x 300 mm (15" x 12")
- Shot weight max: 160 gm
- Screw diameter: 32 mm
- Toggle type energy efficient: 15 HP motor
- No of heating zone: 3 + 1
- Fully automatic, microproocessor based controlled
- Hopper dryer
- Motor 12.

For more details on 110 Ton Sunil Hydraulic Injection Moulding Machine click here