Accessories:
- Interface robot
- Tires Cores PM
- Noyo hydraulic PM
- Noyo hydraulic PF
- Electric motor with the load
- Proportional to expulsion central
- Deputy photo machine
(For picture
For more details on 400 Ton Mir RMPE Injection Moulding Machine click here
Thursday, May 26, 2011
HPM 110 Ton Injection Moulding Machine
Model T110-6.5
- Shot size: 6.5 oz.
- Tie bar spacing: 17" x 14.68"
- Platen size: 22.52" x 24.29"
- Daylight: 27"
- Clamp stroke: 12"
- Mold thickness: 6"/15"
(For picture, please see
For more details on HPM 110 Ton Injection Moulding Machine click here
- Shot size: 6.5 oz.
- Tie bar spacing: 17" x 14.68"
- Platen size: 22.52" x 24.29"
- Daylight: 27"
- Clamp stroke: 12"
- Mold thickness: 6"/15"
(For picture, please see
For more details on HPM 110 Ton Injection Moulding Machine click here
Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine
Model: KM110-220/60CL
- Shot size: 2.48/2.48 oz.
- Tie bar spacing: 18.5" x 18.5"
- Daylight: 30"
- Clamp stroke: 18.57"
- Mold thickness: 6.63"/22"
Equipped With:
- Robot Interface
For more details on Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine click here
- Shot size: 2.48/2.48 oz.
- Tie bar spacing: 18.5" x 18.5"
- Daylight: 30"
- Clamp stroke: 18.57"
- Mold thickness: 6.63"/22"
Equipped With:
- Robot Interface
For more details on Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine click here
Van Dorn 120 Ton Injection Moulding Machine
Model: 120RS-3FHT
Shot size: 3 oz.
- Tie bar spacing: 17" x 17"
- Platen size: 25" x 25"
- Daylight: 30"
- Clamp stroke: 14"
- Mold thickness: 6" Min.
- Voltage: 230/460
Features:
Eqquipped With:
- Pathfinder Control
- Air Blow
- Hydraulic K.
For more details on Van Dorn 120 Ton Injection Moulding Machine click here
Shot size: 3 oz.
- Tie bar spacing: 17" x 17"
- Platen size: 25" x 25"
- Daylight: 30"
- Clamp stroke: 14"
- Mold thickness: 6" Min.
- Voltage: 230/460
Features:
Eqquipped With:
- Pathfinder Control
- Air Blow
- Hydraulic K.
For more details on Van Dorn 120 Ton Injection Moulding Machine click here
Sigma-400 Ton Injection Moulding Machine
- Tiebar distance: 735 x 735 mm
- Min/max. Mold height:250/700 mm
- Clamp stoke: 650 mm
- Max daylight:1350mm
- Screw dia: 80 mm
- Shot capacity: 2179 gms (P.S)
- Ele. Motor: 60 H.P
- With var
For more details on Sigma-400 Ton Injection Moulding Machine click here
- Min/max. Mold height:250/700 mm
- Clamp stoke: 650 mm
- Max daylight:1350mm
- Screw dia: 80 mm
- Shot capacity: 2179 gms (P.S)
- Ele. Motor: 60 H.P
- With var
For more details on Sigma-400 Ton Injection Moulding Machine click here
Intertech 120 Ton Injection Moulding Machine
Model: EN120
- Shot size: 6 oz.
- Tie bar Spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features
Equipped With:
- EMPC Easy Micr
For more details on Intertech 120 Ton Injection Moulding Machine click here
- Shot size: 6 oz.
- Tie bar Spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features
Equipped With:
- EMPC Easy Micr
For more details on Intertech 120 Ton Injection Moulding Machine click here
Van Dorn/Trubor 125 Ton Injection Moulding Machine
- Shot size: 9 oz
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Equipped with:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hydraulic clamp
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Equipped with:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hydraulic clamp
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
Intertech 120 Ton Injection Moulding Machine
Model: EN120
- Shot size: 6 oz.
- Tie bar spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features:
Equipped With:
- EMPC Easy Mic
For more details on Intertech 120 Ton Injection Moulding Machine click here
- Shot size: 6 oz.
- Tie bar spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features:
Equipped With:
- EMPC Easy Mic
For more details on Intertech 120 Ton Injection Moulding Machine click here
Van Dorn/Trubor 125 Ton Injection Moulding Machine
- Shot size: 9 oz.
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Features:
Equipped With:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hyd
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Features:
Equipped With:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hyd
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
Reed 150 Ton Injection Moulding Machine
Model: 150TG
- Shot Size: 10.5 oz
- Tie bar spacing: 17" x 17"
- Platen size: 25.5" x 25.5"
- Daylight: 32.88"
- Clamp stroke: 15.88"
- Mold thickness: 4.625"/17"
Equipped With::
- P
For more details on Reed 150 Ton Injection Moulding Machine click here
- Shot Size: 10.5 oz
- Tie bar spacing: 17" x 17"
- Platen size: 25.5" x 25.5"
- Daylight: 32.88"
- Clamp stroke: 15.88"
- Mold thickness: 4.625"/17"
Equipped With::
- P
For more details on Reed 150 Ton Injection Moulding Machine click here
Wednesday, May 18, 2011
Battenfeld 350 ton Injection Moulding Machine
Injection Unit
- Screw diameter: 55mm
- Maximum Injection Pressure: 2482 bar
- Swept Volume: 772 cm
- Maximum Shot Weight GPS: 703 grams
- Maximum Shot Weight PE: 548 grams
- Screw L/D ratiio: 22 plasticising
- Capacity: grams/sec 52
- Injection Rate cm?/sec 249
- Maximum Injection Stroke mm 325
- Screw Speed min -1 285
- Nozzle Contact Force KN 140
- Injection Carriage Stroke mm 500
- Barrel Heating Capacity kw 22.
For more details on Battenfeld 350 ton Injection Moulding Machine click here
- Screw diameter: 55mm
- Maximum Injection Pressure: 2482 bar
- Swept Volume: 772 cm
- Maximum Shot Weight GPS: 703 grams
- Maximum Shot Weight PE: 548 grams
- Screw L/D ratiio: 22 plasticising
- Capacity: grams/sec 52
- Injection Rate cm?/sec 249
- Maximum Injection Stroke mm 325
- Screw Speed min -1 285
- Nozzle Contact Force KN 140
- Injection Carriage Stroke mm 500
- Barrel Heating Capacity kw 22.
For more details on Battenfeld 350 ton Injection Moulding Machine click here
Battenfeld 350Ton Injection Moulding Machine
Model: BA 3500/1200BK
Type of Lock: Toggle
Injection Unit
Screw diameter: 50mm
- Maximum injection pressure:2205 bar
- Swept Volume: 540cm
- Maximum shot weight GPS : 491grms
- Maximumm shot weight PE: 383 grms
- Screw L/D ratio: 22 Plasticising
- Capacity: 50grms sec
- Injection Rate: 237cm/sec
- Maximum injection stroke: 275mm
- screw speed:1 345min
- Nozzle contact force:140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity:20.
For more details on Battenfeld 350Ton Injection Moulding Machine click here
Type of Lock: Toggle
Injection Unit
Screw diameter: 50mm
- Maximum injection pressure:2205 bar
- Swept Volume: 540cm
- Maximum shot weight GPS : 491grms
- Maximumm shot weight PE: 383 grms
- Screw L/D ratio: 22 Plasticising
- Capacity: 50grms sec
- Injection Rate: 237cm/sec
- Maximum injection stroke: 275mm
- screw speed:1 345min
- Nozzle contact force:140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity:20.
For more details on Battenfeld 350Ton Injection Moulding Machine click here
Battenfeld 270 Ton Injecton Moulding Machine
Model: BA 2700/1200BK
Type of Lock: Toggle
Injection Unit:
- Screw Diameter: 50mm
- Maximum Injection Pressure: 2205 bar
- Swept Volume : 540cm
- Maximum shot weight GPS 491 :grams
- Maaximum Shot Weight PE : 383 grams
- Screw L/D ratio: 22
- Plasticising Capacity: 50 grams/sec
- Injection Rate : 237 cm/sec
- Maximum injection stroke: 275mm
- Screw speed :1 345mm
- Nozzle contact force : 140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity : 20.
For more details on Battenfeld 270 Ton Injecton Moulding Machine click here
Type of Lock: Toggle
Injection Unit:
- Screw Diameter: 50mm
- Maximum Injection Pressure: 2205 bar
- Swept Volume : 540cm
- Maximum shot weight GPS 491 :grams
- Maaximum Shot Weight PE : 383 grams
- Screw L/D ratio: 22
- Plasticising Capacity: 50 grams/sec
- Injection Rate : 237 cm/sec
- Maximum injection stroke: 275mm
- Screw speed :1 345mm
- Nozzle contact force : 140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity : 20.
For more details on Battenfeld 270 Ton Injecton Moulding Machine click here
Oima 360 Ton Injection Moulding Machine
- Description: ECO2000
- Tonnage: 360 ton Screw
- Dia: 75mm
- Shot Weight: 1503grams
- Distanc between tie bar: 632 X 632mm
- Air Circuits 2 Hours: 9.398 6 X accumulators
( For image, ple
For more details on Oima 360 Ton Injection Moulding Machine click here
- Tonnage: 360 ton Screw
- Dia: 75mm
- Shot Weight: 1503grams
- Distanc between tie bar: 632 X 632mm
- Air Circuits 2 Hours: 9.398 6 X accumulators
( For image, ple
For more details on Oima 360 Ton Injection Moulding Machine click here
Husky 500 Ton Injection Moulding Machine
- Distance between Tie bars: 920 x 920 mm
- Platen size: 1306 x 1333 mm
- Ejector stroke: 150 mm
- Mould shut height: 500-1100 mm
- Injection pressure: 2,200 bar
- Injection stroke (max): 30
For more details on Husky 500 Ton Injection Moulding Machine click here
- Platen size: 1306 x 1333 mm
- Ejector stroke: 150 mm
- Mould shut height: 500-1100 mm
- Injection pressure: 2,200 bar
- Injection stroke (max): 30
For more details on Husky 500 Ton Injection Moulding Machine click here
MIR 95 Ton Injection Moulding Machine
Model:MIR MMP 98/120 TWIN SHOT
Mir 2 colour/component machine twin barrels · lock
- Distance between tie bars: 370 X 370 mm
- Between nozzle centres : 200mm
- Register ring - 2 X 100 mm
- Moulld height: 200 - 290 mm
- Moving platen stroke :380 mm
- Screw dia: 34 mmX2
- L:D ratio: 21:1
- Max shot wt.
For more details on MIR 95 Ton Injection Moulding Machine click here
Mir 2 colour/component machine twin barrels · lock
- Distance between tie bars: 370 X 370 mm
- Between nozzle centres : 200mm
- Register ring - 2 X 100 mm
- Moulld height: 200 - 290 mm
- Moving platen stroke :380 mm
- Screw dia: 34 mmX2
- L:D ratio: 21:1
- Max shot wt.
For more details on MIR 95 Ton Injection Moulding Machine click here
Tuesday, May 17, 2011
Sandretto Micro 40 Ton Injection Moulding Machine
Model: Sandretto Micro 400-107
- Microprocessor tonnage: 40 ton screw
- Dia: 24mm
- Shot Weigh: 50grams
- Distance tie bar: 305 X 305mm
- Core pull:1
- Air circuits:1 c/w
- Dal maschio spprue picker hours: 50.
For more details on Sandretto Micro 40 Ton Injection Moulding Machine click here
- Microprocessor tonnage: 40 ton screw
- Dia: 24mm
- Shot Weigh: 50grams
- Distance tie bar: 305 X 305mm
- Core pull:1
- Air circuits:1 c/w
- Dal maschio spprue picker hours: 50.
For more details on Sandretto Micro 40 Ton Injection Moulding Machine click here
Engle 25 Ton Injection Moulding Machine
Model:ES80
- CC88 Comtrol
- Hours run: 52733, 265x265
- Distance Tie bar: 1.5 ton weight number
(For picture please see next, page)
For more details on Engle 25 Ton Injection Moulding Machine click here
- CC88 Comtrol
- Hours run: 52733, 265x265
- Distance Tie bar: 1.5 ton weight number
(For picture please see next, page)
For more details on Engle 25 Ton Injection Moulding Machine click here
Friday, May 06, 2011
Husky 1000 Ton Injection Moulding Mavchine
- Tie bar spacing: 74.8" (v) x 59.1" (w)
- Platen size: 86.6" (W) x 73.2" (V)
- Clamp stroke: 94.5"
- Max daylight: 126"
- Min/max shut height: 31.5" Min; 95" Max
- Tie Bar diameter: 9"
- Screw diameter: 5.
For more details on Husky 1000 Ton Injection Moulding Machine click here
- Platen size: 86.6" (W) x 73.2" (V)
- Clamp stroke: 94.5"
- Max daylight: 126"
- Min/max shut height: 31.5" Min; 95" Max
- Tie Bar diameter: 9"
- Screw diameter: 5.
For more details on Husky 1000 Ton Injection Moulding Machine click here
Toyo 90 Ton Injection Moulding Machine
Model: TI-90G2
- Shot size:.5.5 Oz
- Shot size grams: 155.92225
- Tie bar spacing: 14.76" x 14.76"
- Platen size: 21.26" x 20.67"
- Daylight: 13.78"
- Control: PLCS-6
- Screw diameter: 1.57"
-- Amps: 75
- HP: 25
- Ejector stroke: 3.
For more details on Toyo 90 Ton Injection Moulding Machine click here
- Shot size:.5.5 Oz
- Shot size grams: 155.92225
- Tie bar spacing: 14.76" x 14.76"
- Platen size: 21.26" x 20.67"
- Daylight: 13.78"
- Control: PLCS-6
- Screw diameter: 1.57"
-- Amps: 75
- HP: 25
- Ejector stroke: 3.
For more details on Toyo 90 Ton Injection Moulding Machine click here
Sumitomo 100 Ton Injection Moulding Machine
Model: SH100C
- Tie bar spacing: 16.14" x 16.14"
- Platen size: 16.14" x 24.02"
- Clamp type: Hydromechanical
- Screw diameter: 36 mm
- Voltage: 460/30/60
- Injection unit size: 163 ccm (C160)
For more details on Sumitomo 100 Ton Injection Moulding Machine click here
- Tie bar spacing: 16.14" x 16.14"
- Platen size: 16.14" x 24.02"
- Clamp type: Hydromechanical
- Screw diameter: 36 mm
- Voltage: 460/30/60
- Injection unit size: 163 ccm (C160)
For more details on Sumitomo 100 Ton Injection Moulding Machine click here
Cincinnati Milacron 110 Ton Injection Moulding Machine
Model: VT110-8
- Shot size: 7.87 Oz
- Shot size grams: 223.110565
- Tie bar spacing: 15.74" x 18.50"
- Daylight: 35.43"
- Clamp type: Toggle
- Screw diameter: 40 mm
- Voltage: 480
- Ejector sttroke: 3.
For more details on Cincinnati Milacron 110 Ton Injection Moulding Machine click here
- Shot size: 7.87 Oz
- Shot size grams: 223.110565
- Tie bar spacing: 15.74" x 18.50"
- Daylight: 35.43"
- Clamp type: Toggle
- Screw diameter: 40 mm
- Voltage: 480
- Ejector sttroke: 3.
For more details on Cincinnati Milacron 110 Ton Injection Moulding Machine click here
Tuesday, May 03, 2011
850 Ton Injection Moulding Machine
We are looking for 850 ton injection moulding machine as follows:
- Preferred Brands - JSW/ Toshiba/ Mitsubishi
- Acceptable age: 10 years old
- Platen size: 1060 x 1060
- Locking type: Toggle
-
For more details on 850 Ton Injection Moulding Machine click here
- Preferred Brands - JSW/ Toshiba/ Mitsubishi
- Acceptable age: 10 years old
- Platen size: 1060 x 1060
- Locking type: Toggle
-
For more details on 850 Ton Injection Moulding Machine click here
Engel 200 Ton Injection Moulding Machine
Model:E-motion EM740/200 All Electric (Tiebarless)
- Shot size:10.3 Oz
- Shot size grams: 291.99985
- Platen size:37.40" x 29.53"
- Daylight:37.41"
- Screw diameter:45mm
- Clamp stroke:17.72"
-- Voltage: 460
- Injection unit size:19.
For more details on Engel 200 Ton Injection Moulding Machine click here
- Shot size:10.3 Oz
- Shot size grams: 291.99985
- Platen size:37.40" x 29.53"
- Daylight:37.41"
- Screw diameter:45mm
- Clamp stroke:17.72"
-- Voltage: 460
- Injection unit size:19.
For more details on Engel 200 Ton Injection Moulding Machine click here
Krauss Maffei 320 Ton Injection Moulding Machine
Model: KM320-1900C3
- Platen size: 41.73" x 43.11"
- Distance between tie-bars: 27.95" x 27.95" - Maximum daylight: 51.18"
- Clamp stroke: 36.22"
- Screw diameter: 60mm
- Weight: 35,000 lbs
Equipped With:
- MC-4 control
- Two platen design
- 24.
For more details on Krauss Maffei 320 Ton Injection Moulding Machine click here
- Platen size: 41.73" x 43.11"
- Distance between tie-bars: 27.95" x 27.95" - Maximum daylight: 51.18"
- Clamp stroke: 36.22"
- Screw diameter: 60mm
- Weight: 35,000 lbs
Equipped With:
- MC-4 control
- Two platen design
- 24.
For more details on Krauss Maffei 320 Ton Injection Moulding Machine click here
Niigata 50 ton Injection Moulder
Model: CN-50
- Screw stroke: 100 mm
- Screw diameter: 30 mm
- Shot weight (PS): 58 gms.
- Injection pressure: 2030 Kg/cm2
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 250 mm
- Minn.
For more details on Niigata 50 ton Injection Moulder click here
- Screw stroke: 100 mm
- Screw diameter: 30 mm
- Shot weight (PS): 58 gms.
- Injection pressure: 2030 Kg/cm2
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 250 mm
- Minn.
For more details on Niigata 50 ton Injection Moulder click here
Subscribe to:
Posts (Atom)