1000 Ton Cincinnati Injection Moulder

Model: VL1000 Square
- Shot size: 181 oz.(125mm/c)
- Tie bar spacing: 44.09" x 44.09"
- Platen size: 62.99" x 62.99"
- Daylight: 92.5"
- Clamp stroke: 48"

Dimensions:
- Clamp: 26' L x 99.

For more details on 1000 Ton Cincinnati Injection Moulder click here

1150 Ton Goldstar Injection Moulder

Model: LGH-1150M
- Shot size: 162 oz.
- Tie bar spacing: 55.1" x 49.2"
- Platen size: 76.8" x 70.9"
- Daylight: 94.5"
- Clamp stroke: 70.9"
- Mold thickness: 23.6"/59.1"

Equipped with:

For more details on 1150 Ton Goldstar Injection Moulder click here

500 Ton Toshiba Injection Moulder

Model: ISF500-34B
- Shot size: 76 oz.
- Tie bar spacing: 31.8" x 31.8"
- Platen size: 45.7" x 45.7"
- Daylight: 55.1"/15.8"
- Clamp stroke: 39"

Equipped with:
- Injectvisor VL control

For more details on 500 Ton Toshiba Injection Moulder click here

500 Ton Toshiba Injection Moulder

Model: IGGS500V10-27B
- Shot size: 63 oz.
- Tie bar spacing: 34.2" 31.8"
- Platen size: 48.4" x 45.6"
- Daylight: 55.1"/13.8"

Equipped with:
- Full hydraulic clamp
- V-10 control
- Du

For more details on 500 Ton Toshiba Injection Moulder click here

500 Ton Van Dorn HT Injection Moulder

Model: 500HT-60F
- Shot size: 60 oz.
- Tie bar spacing: 32.5" x 32.5"
- Platen size: 48" x 48"
- Daylight: 10"/60"

Equipped with:
- Pathfinder 2500 control
- Dual core pull
- Hydrauliic K.

For more details on 500 Ton Van Dorn HT Injection Moulder click here

825 Ton Husky Injection Moulder

Model: LX750RS120/100
- Shot size: 108 oz.
- Tie bar spacing: 44.5" x 44.5"
- Daylight: 86.6"
- Clamp stroke: 43.3"
- Mold thickness: 43.3"
- Voltage: 460

(For images, please see next p

For more details on 825 Ton Husky Injection Moulder click here

500 ton Van Dorn Injection Moulder

Model: 500HP80FLP
- Shot size: 80 oz.
- Tie bar spacing: 36.5" x 32.5"
- Platen size: 51" x 47"
- Daylight: 62"
- Clamp stroke: 40"
- Mold thickness: 12"/27.5"

Equipped with:
- Pathf

For more details on 500 ton Van Dorn Injection Moulder click here

Thin Wall Injection Molding Machine

We need high pressure 225-250 tons injection moulding machine as follows:
- High injection pressure screw
- Our need is to manufacture plastic cones (textile industry) shot weight would be about 70 grams in PP (mold of 4 cavities each cone has a weight of 14 grams)
- And the other article would be plastic glasses shot weight max 150 grams in PS (mold of max 6 cavities each glass weight about 22 grams)
- Machine could be of an age around 10 years, and we are looking for Husky mainly or Nestal, to have high cycle.

For more details on Thin Wall Injection Molding Machine click here

JSW 850 Ton Injection Moulder

Model: J850E-C5
- Screw diameter: 120 mm
- Injection pressure: 1,440 kg/cm2
- Theoretical injection volume: 5,991 cm3
- Shot weight (PS): 5,452 g
- Injection rate: 1,010 cm3/sec
- Plasticizing ccapacity (PS): 530 kg/h
- Screw speed:
a.

For more details on JSW 850 Ton Injection Moulder click here

Hemscheidt 800 Ton Reconditioned Injection Moulder

Model: 800 H
- Shot weight (PS): Approx. 4,350 gram
- Screw diameter: 125 mm
- Tie bar distance: 950 x 950 mm
- Daylight: 2150 mm

Equipped with:
- Hydraulic ejector
- 2 cores
- Electronic Siiemens S 5
- Accumulator

Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.

For more details on Hemscheidt 800 Ton Reconditioned Injection Moulder click here

Battenfeld 850 Ton Reconditioned Injection Moulder

Model: BA 8500/6300
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm

Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator

Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.

For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here

Van Dorn 700 Ton Injection Moulder

Model: 700-HP-125F
- Shot size: 125 oz
- Tie bar spacing: 36.5" x 36.5"
- Max clamp stroke: 44"
- Max daylight: 72.75"
- Platen size: 62" x 53.5"
- Ejector stroke: 10.82"

Equipped with:
- P

For more details on Van Dorn 700 Ton Injection Moulder click here

Battenfeld 850 Ton Reconditioned Injection Moulder

Model: BA 8500/6300
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm

Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator

Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.

For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here

Van Dorn 800 Tons Injection Moulder

Model: 730HP-6800
- Shot size: 139.1 oz
- Platen size: 59.5" x 56.9"
- Daylight open min / max: 17.9"/70.1"
- Clamp stroke: 52.2"
- Hydraulic clamp
- Motor: 100 HP
- Machine dimensions: 40.1' xx 8' x 9.

For more details on Van Dorn 800 Tons Injection Moulder click here

Remu 1100 ton Injection Moulding Machines

1) Model: HMSY 1100/5000
Injection unit:
- Screw diameter: 130 mm
- Max. injection pressure: 1565 bar
- Stroke volume: 7300 cm3
- Max. shot weight (PS): 6430 gms.
- Injection rate: 3320 cc/sec.

- Plasticizing rate: 600 kg/hr.

For more details on Remu 1100 ton Injection Moulding Machines click here

Husky 300 ton Injection Moulder

Model: X300
- Extruder diameter: 100 mm
- Shot capacity: 2,700 gram
- Production per hr.: 8,500
- Preforms weight: 52 gram max.
- Product: 1.5 liter
- Dryer: Novatec
- Hopper: 2,700 liter
- Po

For more details on Husky 300 ton Injection Moulder click here

125 to 130 Tons Injection Moulding Machines

We require 125 to 130 tons injection moulding machines as follows:
- Acceptable age: 5 years
- Minimum opening: 15 inch
- Fully micro processor required
- Budget price: INR 7,00,000 or depends on

For more details on 125 to 130 Tons Injection Moulding Machines click here

350 Ton Injection Moulding Machine

We need 350 ton injection moulding machine as follows:
- Preferred brand: Ferromatik Milacron or good brand
- Acceptable age: 2000



For more details on 350 Ton Injection Moulding Machine click here

750 to 850 Tons Injection Moulding Machines

We are looking for 750 to 850 tons injection moulding machines for automotive parts as follows:
- Tie bar distance: Min. 1050 x 1050 mm
- Acceptable age: Max 10 years old
- The machine must be in r

For more details on 750 to 850 Tons Injection Moulding Machines click here