Wednesday, October 06, 2010

Husky 900 ton Injection Moulder

Model: EWLL 900 RS, 135/125, SMC
- Weight: 62 ton
- Hour: 56,000 hr
- Series - E
- Distance between the tie bars: 1,170 x 1,550 mm
- Max. mould opening stroke: 2,470 mm
- Minimum mould height: 5500 mm
- Maximum mould height: 1,620 mm
- Screw diameter: 135 mm
- Ejector stroke: 250 mm
- Injection shot volume: 8,588 cc
- Injection shot weight: 5,550 pp (gram)
- The machine is fully simultaneous.

For more details on Husky 900 ton Injection Moulder click here

400 ton Injection Moulding Machine

We are looking for 400 ton injection moulding machine. The machine should be not older than year 2000.

For more details on 400 ton Injection Moulding Machine click here

350 ton Injection Moulding Machine

We are looking for 350 ton injection moulding machine as follows:
- Acceptable age: 15 years old
- Preferred brands: Toshiba, Niigata
- Locking type: Toggle
- PLC controller should not arise any p

For more details on 350 ton Injection Moulding Machine click here

JSW 30 ton Injection Moulder

- Distance between rod: (H) 260 mm x (V) 260 mm
- Clamping stroke: Max. 230 mm
- Daylight opening: 480 mm

K Screw diameter: 20 mm
- Injection pressure: 2,590 kg/cm2
- Shot volume: 25 cm3

A S

For more details on JSW 30 ton Injection Moulder click here

JSW 220 ton Injection Moulder

Model: JSW - 220E-C5
Injection side:
- Screw diameter: 53 mm
- Swept volume: 463 cm3
- Shot weight (PS): 421 gms.
- Injection rate: 249 Cm3/sec.
- Injection pressure: 1820 Kgf/cm3
- Plasticizinng rate: 163 kg/hr.

For more details on JSW 220 ton Injection Moulder click here

80 tons Injection Moulding Machine

We are looking for 80 tons injection moulding machine as follows:
- Acceptable age: 6 to 7 years old
- Platen size: 412 x 412, 350 x 350 mm
- Locking type: Toggle
- Budget price: INR 2,50,000


For more details on 80 tons Injection Moulding Machine click here

Meiki 50 ton Injection Moulding Machine

Model: M50C-SJ
- Year: 2000
- Price: CIF Mumbai, India US$ 22,800

(For images, please see next pages)


For more details on Meiki 50 ton Injection Moulding Machine click here

946 Ton Nissei Injection Molding Machine

Model: FV9200
- Platen Size: 70.90" x 70.90"
- Distance Between Tie Bars: 52.40" x 52.40"
- Clamp Stroke: 38.39"
- Maximum Daylight: 88.98"
- Minimum Die Thickness: 27.56"
- Maximum Die Thicknesss: 50.

For more details on 946 Ton Nissei Injection Molding Machine click here

100 to 150 ton Injection Moulding Machine for Syringes

We need 100 ton to 150 used injection moulding machine for disposable syringe manufacturing.
- Our mould size: 340 x 230
- No. of cavity: 16 nos.
- Shot weight: 29 gms. (with runner)

At present

For more details on 100 to 150 ton Injection Moulding Machine for Syringes click here

L&T 250 tons Injection Moulding Machine

We are looking for 250 tons injection moulding machine as follows:
- Accepatable age: 10 to 15 years old
- Preffered brand: L&T
- Platen size: 1,155 x 1,155 mm
- Mould to be run:- Two cavity of 7330 grams preform for 20 liters PET jars
- Opening size: 719 mm
- Injection capacity: 1,650 gms.

For more details on L&T 250 tons Injection Moulding Machine click here