We are looking for 2 injection moulding machines for making plastic chairs.
- Tonnage: 800 ton and 650 ton
- Acceptable age: 7 to 8 years old
- Preferred brands: JSW, Mitsubishi, Nissei or any Japa
For more details on 800 and 650 ton Injection Moulding Machines click here
Tuesday, June 29, 2010
110 to 150 ton Injection Moulding Machine
We need 110 to 150 ton injection moulding machine of any good brand.
- Machine must be in good working condition
- Budget price: Above INR 10,00,000/-
For more details on 110 to 150 ton Injection Moulding Machine click here
- Machine must be in good working condition
- Budget price: Above INR 10,00,000/-
For more details on 110 to 150 ton Injection Moulding Machine click here
140 to 150 tons Injection Moulding Machine
We are looking for 140 to 150 tons injection moulding machine as follows:
- Tie bar distance: 450 x 450 mm
- Shot capacity: 200 gms.
- Preferred brands: Any good Chinese make
- Acceptable age: Ove
For more details on 140 to 150 tons Injection Moulding Machine click here
- Tie bar distance: 450 x 450 mm
- Shot capacity: 200 gms.
- Preferred brands: Any good Chinese make
- Acceptable age: Ove
For more details on 140 to 150 tons Injection Moulding Machine click here
100 to 220 tons Injection Moulding Machine
We are looking for 100 to 220 tons injection moulding machine as follows:
- Preferred brands: Toshiba, L&T, Ferromatik, JSW, Demag, Cincinnati
- Acceptable age: Over 2000 model
For more details on 100 to 220 tons Injection Moulding Machine click here
- Preferred brands: Toshiba, L&T, Ferromatik, JSW, Demag, Cincinnati
- Acceptable age: Over 2000 model
For more details on 100 to 220 tons Injection Moulding Machine click here
Cincinnati Milacron 500 ton Injection Moulder
Model: VH - 500-54
- Clamping type: Hydraulic RAM
- Distance between tie bar: 863 x 863 mm
- Minimum mold height: 310 mm
- Clamp stoke: 1,290 mm
- Max. daylight: 1,600 mm
- Shot capacity: 1,610
For more details on Cincinnati Milacron 500 ton Injection Moulder click here
- Clamping type: Hydraulic RAM
- Distance between tie bar: 863 x 863 mm
- Minimum mold height: 310 mm
- Clamp stoke: 1,290 mm
- Max. daylight: 1,600 mm
- Shot capacity: 1,610
For more details on Cincinnati Milacron 500 ton Injection Moulder click here
TMC 500 ton Injection Moulder
Model: TMC - 500 E
- Clamping type: Toggle
- Distance between tie bar: 838 x 838 mm
- Min/Max mold height: 340/885 mm
- Clamp stoke: 790 mm
- Max. daylight: 1675 mm
- Shot capacity: 2075 gms. (PP.
For more details on TMC 500 ton Injection Moulder click here
- Clamping type: Toggle
- Distance between tie bar: 838 x 838 mm
- Min/Max mold height: 340/885 mm
- Clamp stoke: 790 mm
- Max. daylight: 1675 mm
- Shot capacity: 2075 gms. (PP.
For more details on TMC 500 ton Injection Moulder click here
300 and 600 Ton Injection Moulding Machines
We are looking for 2 injection moulding machines, one around 300 ton and the other around 600 ton ranges, more or less.
- Acceptable age: No limit as long as the machine is mechanically sound
- Platten size (approx.
For more details on 300 and 600 Ton Injection Moulding Machines click here
- Acceptable age: No limit as long as the machine is mechanically sound
- Platten size (approx.
For more details on 300 and 600 Ton Injection Moulding Machines click here
125 or 130 ton Injection Moulding Machine
We are looking for 125 or 130 ton injection moulding machine as follows:
- Acceptable age: 5 to 10 years old
- Preferred brands: Indomax or Supermax make
- Platen size: Between 14" to 16"
- Lockin
For more details on 125 or 130 ton Injection Moulding Machine click here
- Acceptable age: 5 to 10 years old
- Preferred brands: Indomax or Supermax make
- Platen size: Between 14" to 16"
- Lockin
For more details on 125 or 130 ton Injection Moulding Machine click here
Thursday, June 10, 2010
UBE 650 ton Injection Moulder
Model: UBE PZ-650
- Year: 1989
- Price: US$ 55,000 ex-works
- Machine is in good running condition
(For images, please see next pages)
For more details on UBE 650 ton Injection Moulder click here
- Year: 1989
- Price: US$ 55,000 ex-works
- Machine is in good running condition
(For images, please see next pages)
For more details on UBE 650 ton Injection Moulder click here
JSW 310 ton Injection Moulding Machine
Model: JSW 310EII
- No. of machines: 2
- Screw diameter: 86 mm (3.39")
- Injection Pressure: 1070 kgf/cm3
- Shot weight (PS) 1374 gms (48.46")
- Injection rate: 581 cm3/sec
- Plasticizing capaacity: 340 kg/hr
- Screw revolution rate:
a.
For more details on JSW 310 ton Injection Moulding Machine click here
- No. of machines: 2
- Screw diameter: 86 mm (3.39")
- Injection Pressure: 1070 kgf/cm3
- Shot weight (PS) 1374 gms (48.46")
- Injection rate: 581 cm3/sec
- Plasticizing capaacity: 340 kg/hr
- Screw revolution rate:
a.
For more details on JSW 310 ton Injection Moulding Machine click here
350 to 400 ton Injection Moulding Machine
We need a 350 to 400 ton injection moulding machine for molded plastic furniture
- Acceptable age: 7 to 8 years old, but we can consider units beyond this age
- Preferred brands: Windsor or Cincinna
For more details on 350 to 400 ton Injection Moulding Machine click here
- Acceptable age: 7 to 8 years old, but we can consider units beyond this age
- Preferred brands: Windsor or Cincinna
For more details on 350 to 400 ton Injection Moulding Machine click here
Engel 120 ton Tie bar less Injection Moulder
Model: ES200/120HL
- Operating hours: 15,500 hrs.
- Platen size (h x v): 740 x 680 mm
- Minimum mold height: 300 mm
- Clamp stoke: 500 mm
- Max. daylight: 800 mm
- Screw diameter: 40 mm
- Shot capacity: 226 gms.
For more details on Engel 120 ton Tie bar less Injection Moulder click here
- Operating hours: 15,500 hrs.
- Platen size (h x v): 740 x 680 mm
- Minimum mold height: 300 mm
- Clamp stoke: 500 mm
- Max. daylight: 800 mm
- Screw diameter: 40 mm
- Shot capacity: 226 gms.
For more details on Engel 120 ton Tie bar less Injection Moulder click here
1100 Ton Van Dorn Caliber Injection Moulder
Model: 1100CC-6800C
- Shot size: 166 oz.
- Tie bar spacing: 55.1" x 45.3"
- Platen size: 68.9" x 59.1"
- Daylight: 94.5"
- Clamp stroke: 74.8"
- Mold thickness: 19.7"/51.2"
Equipped wi
For more details on 1100 Ton Van Dorn Caliber Injection Moulder click here
- Shot size: 166 oz.
- Tie bar spacing: 55.1" x 45.3"
- Platen size: 68.9" x 59.1"
- Daylight: 94.5"
- Clamp stroke: 74.8"
- Mold thickness: 19.7"/51.2"
Equipped wi
For more details on 1100 Ton Van Dorn Caliber Injection Moulder click here
Friday, June 04, 2010
Sigma-80 Injection Moulding Machine
Sigma-80 with variable pump
- Tie bar distance: 405 x 360 mm
- Min/max. mold height: 150/400 mm
- Clamp stoke: 310 mm
- Max. daylight: 710 mm
- Screw diameter: 36 mm
- Shot capacity: 125 gms. (PP.
For more details on Sigma-80 Injection Moulding Machine click here
- Tie bar distance: 405 x 360 mm
- Min/max. mold height: 150/400 mm
- Clamp stoke: 310 mm
- Max. daylight: 710 mm
- Screw diameter: 36 mm
- Shot capacity: 125 gms. (PP.
For more details on Sigma-80 Injection Moulding Machine click here
850 to 1300 tons Injection Moulding Machine
We are looking for 850 to 1300 tons injection moulding machine:
- Tie bar distance: 1000 mm
- Shot weight: 3 kg.
- Acceptable age: Over 1996 model
- Budget price: US$ 200,000 to US$ 300,000
For more details on 850 to 1300 tons Injection Moulding Machine click here
- Tie bar distance: 1000 mm
- Shot weight: 3 kg.
- Acceptable age: Over 1996 model
- Budget price: US$ 200,000 to US$ 300,000
For more details on 850 to 1300 tons Injection Moulding Machine click here
100 to 250 ton Injection Moulding Machine
We are looking for 100 to 250 ton injection moulding machine as follows:
- Acceptable age: Over 2003 model
- Preferred brands: Battenfeld, JSW, Arburg,
Supermaster
- Platen size: Standard
- Locki
For more details on 100 to 250 ton Injection Moulding Machine click here
- Acceptable age: Over 2003 model
- Preferred brands: Battenfeld, JSW, Arburg,
Supermaster
- Platen size: Standard
- Locki
For more details on 100 to 250 ton Injection Moulding Machine click here
Nissei Rotary Vertical Insert Injection Moulder
Model #: TSD30R9APSE
- Tonnage: 30
- Light curtain
- Hydraulic core pull
- Control: NC 8000 P2
- Injection unit: LS-26
(For images, please see next pages)
For more details on Nissei Rotary Vertical Insert Injection Moulder click here
- Tonnage: 30
- Light curtain
- Hydraulic core pull
- Control: NC 8000 P2
- Injection unit: LS-26
(For images, please see next pages)
For more details on Nissei Rotary Vertical Insert Injection Moulder click here
Subscribe to:
Posts (Atom)